Jenway 6715 - Manual (Page 45)

27
SeCtion 4 - instrument Settings
4.1 MenU oPtionS
A number of settings can be stored for each signed in user including language, method view settings,
display brightness and time/date display choices so that these do not have to be reset each time a new
user logs in. These can be found under
User Preferences.
note: Administration Functions and Memory Manager options will be greyed out and unavailable
unless the Supervisor has logged in.
– When switching on the product for the first time, or if the previously entered settings
need to be checked, this key should be selected to give access to the following display:
4.2 Set tiMe & DAte
To set the correct date and time select the Set Time & Date key. The time and date can be reset using
the up and down arrows. To accept the new settings select the Enter key. Touching the Cancel key
will return you to the main menu without accepting any alterations to the current settings.
4.3 USer PreFerenCeS
Selecting User Preferences gives access to the following options:
These settings are saved for each user and the individual’s selections are retained when that user logs
in.
Adjust User PIN and Method View Settings options are only available to the Supervisor.
note: Adjust User Pin and Method View Settings will only be available to the Supervisor.