Jenway 6715 - Manual (Page 75)

57
Setting Additional Set-up Parameters using the toolbar icons
Setting Analysis Points
Up to 30 analysis points can be set be selecting the Analysis Points keys and entering the required
wavelength value via the numeric keypad.
The Clear Analysis Points option will clear all previously set analysis points.
To delete or edit individual analysis points select the required analysis point to display:
If Del is selected the analysis point is deleted.
If Edit is selected a new value can be entered
via the numeric keypad.
If an attempt is made to set an analysis point outside the start and end wavelength values the error
message
‘Wavelength for analysis out of spectrum scan range’ will be displayed momentarily and
a triangular symbol will be shown to the side of the incorrect value. This value can be deleted or edited
by selecting the analysis point (in this example 1) and entering a new value within the specified limits.
The analysis points will appear on tags at the relevant point on the spectrum display. They will also be
printed with any printout to the internal or external printer if the
Print Data Points option has been
selected.
6715 CVS
What would you like to Do
to this analysis point?
Del Edit