Jenway 6715 User Manual
Page 77
59
Selecting Axis Colour
Selecting the
Axis Colour key displays a colour selection screen. Touch any one of the eight colours to
select the preferred colour. Once selected, the screen will update to show the selected colour.
Setting Batch iD
Select the
Batch ID key and enter the batch code using the alphanumeric keypad. Select Enter to
accept or
Cancel to remain as a default.
Setting Graph Data Points
The option to print graphs on a full page is only available if the
External printer is selected. If available
and set to
On the scan will be printed on one page (typically A4 landscape format) with the data on
the following pages.
If available and set to
Off the scan will be printed with the data below it (typically top half A4 portrait).
The
Print Graph Data Points key toggles between On and Off.
With this key set to
On all the data points that make up the graph will be printed in a table following
the scan.
note: For a long scan at 0.1nm resolution this can result in many pages of data. It is recommended
that careful consideration should be given to this and that this feature should be set to the
Off
position in this instance.