Jenway 6715 User Manual
Page 82
64
Additional individual samples can be measured by inserting them in the single sample holder and
touching
Scan. Alternatively, multiple samples can be measured with the optional 8 or 6 cell changers
or sequentially with the sipper pump accessory.
Analysing the Scan
Selecting the icon gives access to post scan analysis options, as detailed below:
note: All tools functions are available for use on recalled results in exactly the same manner as
described hereafter.
toolbar icons
Display Settings
Toggles
Auto Scale (Y Axis) On or Off.
If
Off Y axis defaults to manual settings
entered in the method.
Cycles round
Plot Interval settings of
0.1, 0.5, 1.0 and 5.0nm
Zoom
Activates the zoom area select cursors
that can be positioned using the
QWheel™ over the area required.
Repeated presses increase the zoom up
to 5 times.
Returns the zoom to the next lower
level. At x1 this icon is disabled.