Jenway 6715 - Manual (Page 32)

14
if you wish to dispose of the instrument packaging, please do so in an environmentally
responsible manner. Please refer to the following guidelines: -
Cardboard packing items are made from paper sourced from recycled fibres
or managed forests and can be 100% recycled where appropriate facilities
exist. ensure cartons are crushed or flattened before disposal.
Foam packing pieces are manufactured with a reprocessed polyethylene content and can be
easily recycled with other low-density polyethylene (LDPE) materials. Polyethylene foam is
manufactured by a CFC and HCFC free process and contains less than 100ppm heavy metal
content. The European Union Packaging Directive confirms that recovery by means of waste-
to-energy is a sensible waste management alternative. The Polyethylene foam burns cleanly
and contributes a high calorific value.
2.2 inStAllAtion
2.2.1 loCAtion
In ideal circumstances the installation environment will be clean, dry and dust free with the instrument
protected from extreme variations in ambient lighting and temperature change. Ensure the unit is
positioned so that the mains on/off switch is accessible. If a safety problem should be encountered,
switch off at the mains socket and remove the plug from the supply.
Where conditions are less than ideal, maintenance and cleaning must be carried out regularly and
additional protection offered where possible.
The optional dust cover should be used to protect the instrument when not in use.
2.2.2 SUPPly VoltAGe
The 67 series spectrophotometers are powered by a universal switch-mode power supply that operates
from a 90-264Vac mains supply. The correct lead for your supply should be selected.
2.2.3 MAinS ConneCtionS
The leads supplied have a moulded on plug. However, if this is removed for any reason the wires in the
mains lead are colour coded to conform to the internationally recognised standard such that:
UK ConneCtionS US ConneCtionS
Brown live Black live
Blue neutral White neutral
Green/yellow earth Green earth
Safety
When disposing of any removed plug the connectors must be removed or made incapable of
insertion into a mains socket.