Jenway 6715 - Manual (Page 65)

47
Setting Wavelengths
note: If the start or end wavelength is adjusted so that they are closer than twice the plot interval
then the previously set wavelength will be automatically adjusted to ensure a minimum of two
measurement points.
Setting Start Wavelength
Select the Start Wavelength key and enter the wavelength using the numeric keypad. The Clear key
will clear all information entered from the screen. The Del key allows individual digits to be removed.
The Cancel key will return you to the previous menu and the wavelength will not alter. The Enter key
accepts the new wavelength and returns you to the previous menu. (At certain wavelengths order
selecting filters may be heard switching in or out). Select the
Enter key to confirm. The display will
show the entered wavelength.
Setting end Wavelength
Select the End Wavelength key and enter the wavelength using the numeric keypad. The Clear key
will clear all information entered from the screen. The Del key allows individual digits to be removed.
The Cancel key will return you to the previous menu and the wavelength will not alter. The Enter key
accepts the new wavelength and returns you to the previous menu. (At certain wavelengths order
selecting filters may be heard switching in or out). Select the
Enter key to confirm. The display will
show the entered wavelength.