KYORITSU 6315 Instruction Manual - Manual (Page 12)

KEW6315 Safety warnings
KEW6315 - 10 -
● Never disconnect sensors from the connectors of the instrument while the instrument is in use.
● Connect to the downstream side of a circuit breaker since a current capacity at the upstream side
is large.
● Do not touch two lines under test with the metal tips of the test leads.
Caution
● Caution should be taken since conductors under test may be hot.
● Never apply currents or voltages exceeding the maximum allowable input for the instrument for a
long time.
● Do not apply currents or voltages for the Clamp sensors or Voltage test leads while the instrument
is off.
● Don’t use the instrument at dusty places or to be spattered.
● Don’t use the instrument under a strong electric storm or in the vicinity of energized object.
● Never give strong vibrations or drop shocks.
● Insert an SD card to the slot with the top side turned up. If the card is inserted up-side-down, the SD
card or the instrument may be damaged. Confirm the
● While using an SD card, do not replace or remove the card. (The symbol blinks while accessing
SD card.) Otherwise, the saved data in the card may be lost or the instrument may be damaged.
- Clamp sensor -
● Do not bend or pull the cable of the Clamp sensor.
- Treatment after use -
● Power off the instrument and disconnect the Power cord, Voltage test leads and Clamp sensors from
the instrument.
● Remove the batteries if the instrument is to be stored and will not be in use for a long period.
● Remove the SD card when carrying the instrument.
● Never give strong vibrations or drop shocks when carrying the instrument.
● Do not expose the instrument to direct sunlight, high temperatures, humidity or dew.
● Use a damp cloth with neutral detergent or water for cleaning the instrument. Do not use abrasives
or solvents.
● Do not store the instrument if it is wet.
Carefully read and follow the instructions: DANGER, WARNING, CAUTION and NOTE ( )
described in each section.
Meaning of symbols on the instrument:
User must refer to the explanations in the instruction manual.
Instrument with double or reinforced insulation
AC
(Functional) Earth terminal
～ ～ ～ ～