KYORITSU 6315 Instruction Manual - Manual (Page 62)

KEW6315 Settings of demand measurement
KEW6315 - 60 -
”Target value”
Set the demand target value.
Selection
0.001mW - 999.9TW(100.0kW)
* Default setting is highlighted in gray.
Move the blue highlight to “Target”. Show the value entry window.*
Enter the desired target value. Confirm. Cancel.
Either active or apparent power can be set as a demand target value. Pressing the “VA”/ “W”
key while opening the value entry window can switch active and apparent power. Move the blue highlight with
the keys to the unit and alter the unit with keys. Moving the decimal point is possible by
pressing or .
* Unit for apparent power: mVA, _VA, kVA, MVA, GVA, TVA / for active power: mW, _W, kW, MW, GW, TW
* A pop-up appears and show the effective range.