KYORITSU 6315 Instruction Manual - Manual (Page 57)

Settings of voltage measurement KEW6315
- 55 - KEW6315
”Nominal voltage”
Set the nominal voltage values applied from the measured object.
Selection
50V - 600V(100V)
* Default value is highlighted in gray.
Move the blue highlight to “Nominal V”. Show the value entry window.*
Enter the nominal voltage value. Confirm. Cancel.
Default values
When the blue highlight is located at “Nominal V”, you can check a list of the popular values
with the key.
Selection
100V/ 101V/ 110V/ 120V/ 200V/ 202V/ 208V/ 220V/ 230V/
240V/ 277V/ 346V/ 380V/ 400V/ 415V/ 480V/ 600V
Choose the appropriate voltage. Confirm. Cancel.
* A pop-up appears and show the effective range.