KYORITSU 6315 Instruction Manual - Manual (Page 51)

Settings of wiring system KEW6315
- 49 - KEW6315
Settings of wiring system
”Basic wiring”
Choose one according to the wiring system to be measured.
Selection
(1) 1P2W×1
(2) 1P2W×2
(3) 1P2W×3
(4) 1P2W×4
(5) 1P3W×1
(6) 1P3W×2
(7) 3P3W×1
(8) 3P3W×2
(9) 3P3W3A
(10) 3P4W
* Current terminals that are not used in the selected wiring system can be used to
measure rms currents and harmonics.
* Default setting is highlighted in gray.
Move the blue highlight to “Wiring”. Show the pull-down menu.
Select a proper wiring system. Confirm. Cancel.
“+ Clamp” ： Optional clamp sensors
Move the blue highlight to “+ Clamp”. Show the pull-down menu.
Select a proper clamp setting. Confirm. Cancel.