KYORITSU 6315 Instruction Manual - Manual (Page 65)

Settings for Harmonic analysis KEW6315
- 63 - KEW6315
Settings for Harmonic analysis
“THD calculation”
THD stands for ”Total Harmonic Distortion”. Select “THD-F” to calculate the total harmonics distortion
based on the basic wave and “THD-R” to do the calculation based on all rms values.
Selection
THD-F (based on basic wave)/ THD-R (based on all rms values)
* Default setting is highlighted in gray.
Move the blue highlight to “THD calc.”. Show the pull-down menu.
Select the calculation method. Confirm. Cancel.
”MAX hold”
Turn on the MAX hold to show the mark indicates the max rate of content on a harmonics graph.
Selection
ON/ OFF
* Default setting is highlighted in gray.
Move the blue highlight to “MAX hold”. Show the pull-down menu.
Turn on/ off. Confirm. Cancel.