KYORITSU 6315 Instruction Manual - Manual (Page 34)

KEW6315
KEW6315 - 32
Follow the procedure below, and connect the Power cord.
1 Confirm that the instrument is powered off.
2 Connect the Power cord to the Power connector on the instrument.
3 * Connect another end of the Power cord to the outlet.
* Getting KEW6315 started is possible 2 seconds after it is connected to
does not work in this period.
Power supply rating
Rating of power supply is as follows.
Rated supply voltage
Rated power supply
frequency
Max power consumption
Power supply rating
32 -
Follow the procedure below, and connect the Power cord.
powered off.
Connect the Power cord to the Power connector on the instrument.
Connect another end of the Power cord to the outlet.
2 seconds after it is connected to a power source. The Key
100 to 240V AC (±10%)
45 to 65Hz
7VA max