Metex Shark Multi-Parameter Controllers & Analyzers - Manual (Page 121)

Flow - Diagnostics Menu - Permanent Total 7.13 Page 119
S H A R K
MULTI-PARAMETER CONTROLLER & ANALYZER USER’S MANUAL
Flow - Diagnostics Menu - Permanent Total 7.13
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
Press to view the Total
Life Flow to date.
The Permanent Total is a running total off all the volume units that
have been accumulated by the controller. It starts at zero when new,
and can only be set to zero at the factory.
This is a read only screen.
UP
NOTE
PRESS THE AND KEYS
TOGETHER TO GO IMMEDIATELY BACK TO
RUN MODE
DOWN
Press to return to the
menu.
RUN MODE
7421413 >
TOTAL LIFE FLOW
DIAGNOSTICS
SETUP
CALIBRATION
UTILITIES
TOTAL 0
PERMANENT TOTAL
SENSOR INPUT
CALIBRATION DATA
FIRMWARE REV.