Metex Shark Multi-Parameter Controllers & Analyzers - Manual (Page 65)

S H A R K
MULTI-PARAMETER CONTROLLER & ANALYZER USER’S MANUAL
ORP - Diagnostics Menu - Firmware Rev 5.14
ORP - Diagnostics Menu - Firmware Rev 5.14 Page 63
DOWN
DOWN
DOWN
DOWN
DOWN
The FIRMWARE REV menu allows the user to see what revision of
the firmware is currently installed in the controller. This is a Read
Only menu item. RUN MODE
UP
NOTE
PRESS THE AND KEYS
TOGETHER TO GO IMMEDIATELY BACK TO
RUN MODE
DOWN
500mV 25.0C
DIAGNOSTICS
SETUP
UTILITIES
CALIBRATION
FIRMWARE REV. FIRMWARE REV.
1.15
>