Metex Shark Multi-Parameter Controllers & Analyzers - Manual (Page 96)

Conductivity - Diagnostics Menu - Sensor Input 6.17 Page 94
S H A R K
MULTI-PARAMETER CONTROLLER & ANALYZER USER’S MANUAL
Conductivity - Diagnostics Menu - Sensor Input 6.17
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
UP
NOTE
PRESS THE AND KEYS
TOGETHER TO GO IMMEDIATELY BACK TO
RUN MODE
DOWN
Press to view the
Sensor Input data.
The Sensor Input Menu allows the user to view real time, uncompensated
process data from the conductivity cell.
This is a Read only menu item.
This "Live Data" screen is useful for trouble shooting purposes when
diagnosing cell or process problems.
The top line shows the resistance of the cell,
The bottom line shows the actual value of the
temperature sensor in ohms.
RUN MODE 1000uS 25.0C
DIAGNOSTICS
UTILITIES
CALIBRATION
SETUP
CELL 966
TEMP 2953 >
SENSOR INPUT
FIRMWARE REV.
CALIBRATION DATA
Ω
Ω