Brother MFC-9800 - Manual (Page 49)

I N I T I A L S E T U P 4 - 2
Setting Cassette Usage
The default setting of AUTO allows your MFC to choose the optional Cassette
#2 if paper is out in Cassette #1 or if incoming faxes will fit best on the paper in
Cassette #2. Choose
CASSETTE#1 ONLY , CASSETTE#2 ONLY or
CASSETTE USAGE if you want to keep special paper in the other cassette and
control when it is used.
1
Press Menu, 1, 1.
2
Press or to select CASSETTE
USAGE , and then press Set.
3 To set cassette usage for faxes, press or to select FOR FAX , and then
press Set.
—OR—To set cassette usage for copies, press or to select FOR
COPY , and then press Set.
—OR—If you are finished, go to Step 5.
4
Press or to select AUTO , CASSETTE#1 ONLY or CASSETTE#2
ONLY , and then press Set.
5
Press Stop/Exit.
Setting Date and Time
Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Menu, 1, 2.
2
Enter the last two digits of the year, and then
press Set.
For example, enter 02 for the year 2002.
3 Enter two digits for the month, and then press
Set.
For example, enter 09 for September,
or 10 for October.
4
Enter two digits for the day, and then press
Set.
For example, 06
5
Enter the time in 24-hour format, and then
press Set.
For example, enter 15:25 for 3:25 PM.
6 Press Stop/Exit.
The LCD now shows the date and time you set whenever the MFC is standing
by.
1 . P A P E R S I Z E
2 . D A T E / T I M E
Y E A R : X X
E N T E R & S E T K E Y
M O N T H : X X
E N T E R & S E T K E Y
D A Y : X X
E N T E R & S E T K E Y
T I M E : X X : X X
E N T E R & S E T K E Y