Brother MFC-9800 - Manual (Page 9)

vii
Quick Reference Guide
Sending Faxes
Automatic Transmission
1
Place the original face up in the
ADF, or face down on the scanner
glass.
2 Enter the fax number using One
Touch, Speed Dial, Search or the
dial pad.
3
Press Fax Start .
Sending a Cover Page
1
Place the original face up in the
ADF, or face down on the scanner
glass.
2
Press Menu , 2 , 2 , 8 .
3 When NEXT FAX ONLY
appears, press Set .
4
Press or to select ON (or
OFF ), and then press Set .
5
Press or to select a
comment, and then press Set .
6
Enter two digits to indicate the
number of pages being sent, and
then press
Set .
7
Press 1 to select additional settings
— OR —Press 2 if you are ready to
fax.
8
Enter the fax number.
9
Press Fax Start.
Real Time Transmission
You can send faxes in real time.
1 Place the original face up in the ADF,
or face down on the scanner glass.
2
Press Menu, 2, 2, 6.
3 Press or to select ON (or
OFF ), and then press Set—OR—
For the next transmission only,
press
or to select NEXT
FAX ONLY , and then press Set.
4
For the next fax only, press
or to select ON (or OFF ),
and then press Set.
5
Press 1 to select additional settings
—OR—Press 2 to fax.
6
Enter the fax number.
7
Press Fax Start.
Receiving Faxes
Select Receive Mode
There are four Receive modes:
FAX ONLY , MANUAL,
FAX/TEL and TAD: ANSWER
MACH . Press Receive Mode
until the LCD shows your
selection. After two seconds the
LCD returns to the Data and Time
prompt and shows the new Receive
mode.
Brother fax-back system :
In USA: 1-800-521-2846
Brother Global Web Site :
http://www.brother.com
Frequently Asked Questions (FAQs)
and Product Support:
http://solutions.brother.com
Brother Accessories & Supplies :
In USA: 1-888-879-3232 (voice)
1-800-947-1445 (fax)
http://www.brothermall.com
In Canada: 1-877-BROTHER (voice)
Q U I C K R E F E R E N C E G U I D E