Brother MFC-9800 - Manual (Page 99)

F O R D O S U S E R S 12 - 2
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and
software to install the program:
Follow these steps to install the remote printer console program:
1
Make sure your Brother MFC is connected to your computer and is set to
Online.
2 Start your computer and go to the DOS prompt. If you are in Windows ® , exit
and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM
drive for “x”), and then press Enter.
5
Type CD RPCX, and then press Enter.
6
Type RPCSETUP, and then press Enter.
7
Follow the instructions in the installer.
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
C:\>x:
x:\>CD RPCX5
x:\RPCX5>RPCSETUP