Brother MFC-9800 - Manual (Page 55)

S E T U P R E C E I V E 5 - 2
To Select or Change Your Receive Mode
1
Press Receive Mode. The LCD shows your current selection.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time display, along with your new
Receive Mode setting.
Setting Ring Delay
The Ring Delay setting determines the number of times the MFC rings before it
answers. If you have extension phones on the same line as the MFC or are using
the telephone company’s Distinctive Ring service, keep the Ring Delay default
setting of 4. You can try increasing the Ring Delay to 4 rings; however, if you
do not receive all your faxes, you must reset it to 4 rings.
1
Press Menu, 2, 1, 1.
2
Press or to select how many times
the line rings before the MFC answers
(00–04) , and then press Set. If you select 00,
the line doesn’t ring at all.
3
Press Stop/Exit.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.
F A X O N L Y
F A X / T E L
T A D : A N S W E R M A C H .
M A N U A L
09/06 15:25 FAX
Current Receive Mode
1 . R I N G D E L A Y