Brother MFC-9800 - Manual (Page 67)

S E T U P S E N D 6 - 7
Fax Resolution
When you have an original in the ADF or on the scanner glass, you can use the
Resolution key to temporarily change the setting. Press Resolution
repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting for all faxes.
1
Press Menu, 2, 2, 2.
2
Press or to select the resolution
you want, and then press Set.
3 Press Stop/Exit.
STANDARD - Suitable for most typed documents.
FINE - Good for small print; transmits a little slower than Standard resolution.
SUPER FINE - Good for small print or artwork; transmits slower than Fine
resolution.
PHOTO - Use when original has varying shades of gray; slowest transmission
time.
Composing Electronic Cover Page
The cover page is generated at the receiving party’s MFC. Your cover page
includes the name stored in the One Touch or Speed Dial memory. If you are
dialing manually, the name is left blank. (See
One Touch Dialing and Speed
Dialing , page 7-4.)
The cover page indicates your Station ID and the number of pages you’re
sending. If you have Coverpage Setup set to
ON (Menu, 2, 2, 8), the number
of pages remains blank. (See Setting Station ID , page 4-3.)
You can include a comment on your cover page.
Instead of using one of the pre-programmed comments above, you can enter one
of two customized messages. (Up to 27 characters long) Use the chart on page
4-4 to help enter characters. (See
Composing Your Own Comments , page 6-8.)
2 . F A X R E S O L U T I O N
1 . C O M M E N T O F F
2 . P L E A S E C A L L
3 . U R G E N T
4 . C O N F I D E N T I A L
5 . ( U S E R D E F I N E D )
6 . ( U S E R D E F I N E D )