Brother MFC-9800 - Manual (Page 52)

4 - 5 I N I T I A L S E T U P
Setting the Ring Volume
1 Press Menu, 1, 4, 1.
2
Press or to select OFF , LOW ,
MED , or HIGH , and then press Set.
3 Press Stop/Exit.
Setting the Beeper Volume
You can set the beeper to LOW , HIGH or OFF . The default setting is LOW .
When the beeper is set to LOW or HIGH , the MFC beeps every time you press
a key or make an error and when fax sending or receiving has finished.
1 Press Menu, 1, 4, 2.
2
Press or to select your option.
3 When the LCD shows the option you want, press Set.
4
Press Stop/Exit.
Setting the Speaker Volume
You can set the volume of the MFC’s one-way speaker.
1
Press Menu, 1, 4, 3.
2
Press or to select OFF , LOW ,
MED , or HIGH , and then press Set.
3
Press Stop/Exit.
Memory Storage
In the event of a power failure, all menu settings are stored permanently:
GENERAL SETUP , SETUP RECEIVE , SET AUTO DIAL , REMOTE
FAX OPT plus the COVERPG SETUP and COVERPAGE MSG (from
SETUP SEND ). You may have to reset the date and time.
Turning On Automatic Daylight Savings Time
You can set the MFC to change automatically for Daylight Savings Time.
It will reset itself forward one hour in the Spring and back one hour in the Fall.
1
Press Menu, 1, 6.
2 Press or to select ON (or OFF ), and
then press Set.
3
Press Stop/Exit.
1 . R I N G
2 . B E E P E R
3 . S P E A K E R
6 . A U T O D A Y L I G H T