Brother MFC-9800 - Manual (Page 53)

I N I T I A L S E T U P 4 - 6
Toner Save
You can conserve toner using this feature. When you set Toner Save to ON print
appears somewhat lighter. The default setting is OFF .
1
Press Menu, 1, 7.
2
Press or to select
ON (or OFF ) and then press Set.
3
Press Stop/Exit.
Sleep Mode
Setting the Sleep Mode reduces power consumption while the MFC is idle. You
can choose how long the MFC is idle (from 00 to 99 minutes) before it drops
into sleep mode. The timer automatically resets itself after the MFC receives a
fax or PC data, or makes a copy. The default setting is 5 minutes.
1
Press Menu, 1, 8.
2 Use the Dial pad to enter the length of
time the MFC is idle before it drops into
sleep mode (00 to 99 minutes), and then press Set.
3 Press Stop/Exit.
Setting Tone/Pulse Dialing Mode (For Canada Only)
Your MFC comes set to accommodate tone (multi-frequency) dialing service. If
you have pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Menu, 1, 9.
2 Press or to select TONE or
PULSE dialing mode, and then press
Set.
3 Press Stop/Exit.
If you make copies frequently, make the idle time long enough so you won’t always
be waiting for the MFC to warm up.
7 . T O N E R S A V E
8 . S L E E P M O D E
9 . T O N E / P U L S E