Brother MFC-9800 - Manual (Page 96)

11 - 8 M A K I N G C O P I E S
Paper Type
You can use the following types of paper for copying. For the best print quality,
select the type of media that you are using.
THIN (16lb - 18.4lb) - For thin paper or transparency
PLAIN (18.7lb - 25.3lb) - For ordinary plain paper
THICK (25.6lb - 32lb) - For heavy weight paper or rough paper
THICKER (32.3lb - 43lb) - For heavier weight paper, rough paper or bond
paper.
TRANSPARENCY - For transparency (OHP)
1
Press Options and or to select OPT:PAPER TYPE , and then press
Set.
2 Press or to select your type of paper, and then press Set.
3
Press Copy—OR—Press or for additional settings.
Changing Default Copy Settings
Press Menu, 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Copy Mode
and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press or to scroll through the options for each setting. Press Set
to save your selection. Press Stop/Exit. —OR—Press to select the next
setting you want to change.
Press Menu, and 3.
TEXT
1.COPY MODE
2.CONTRAST - +
is default
AUTO
PHOTO
PLAIN
THICK
THICKER
3.PAPER TYPE THIN