Brother MFC-9800 - Manual (Page 68)

6 - 8 S E T U P S E N D
Most of the SETUP SEND menu selections are temporary settings that allow
you to make adjustments for each fax you send. However, you can set up your
cover page and cover page comments in advance. The Cover Page Setup and
Cover Page Message menu selections change the default settings.
Composing Your Own Comments
You can set up two custom comments.
1
Press Menu, 2, 2, 9.
2
Press or to choose position 5 or
6 for your customized comment, and then
press Set.
3
Use the dial pad to enter your customized comment, and then press Set.
(See
Entering Text , page 4-4.)
4
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
Cover Page for the Next Fax Only
Make sure the Station ID is set up. (see page 4-3.) This feature does not work
without the Station ID.
You can set the fax to send a cover page with a particular fax. This cover page
will include the number of pages in your original.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Menu, 2, 2, 8.
3
When the LCD shows NEXT FAX
ONLY , press Set.
4
Press or to select ON (or OFF ), and then press Set.
5
Press or to select one of the standard or custom comments, and then
press Set.
6
Enter two digits to indicate the number of pages you are sending, and then press
Set. (For example, press 0 2 for 2.) (Enter 0 0 to leave the number of pages
blank.) If you make a mistake, press
to back up and reenter the number of
pages.
7 Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
8
Enter the fax number you’re calling.
9
Press Fax Start.
9 . C O V E R P A G E M S G
8 . C O V E R P G S E T U P