Brother MFC-9800 - Manual (Page 82)

9 - 1 R E M O T E F A X O P T I O N S
9
9
Remote Fax Options
Fax Forwarding/Paging
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON , your MFC stores the received fax in
memory. Then it dials the fax number you’ve programmed and forwards the fax
message.
1
Press Menu, 2, 5, 1.
2
Press or until the LCD shows
FAX FORWARD , and then press Set.
3
The LCD prompts you to enter the number of the fax machine where faxes will
be forwarded. Enter the forwarding number (up to 20 digits), and then press Set.
4
Press Stop/Exit.
Programming Your Pager Number
When Paging is selected, your MFC dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN); this
activates your pager so you know you have a fax message in the memory.
1
Press Menu, 2, 5, 1.
2 Press or until the LCD shows
PAGING , and then press Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Set. Do not include the area code if it is
the same as that of your MFC.
For example,
1 8 0 0 5 5 5 1 2 3 4 # #.
You cannot use Paging and Fax Forwarding at the same time.
To use Paging or Fax Forwarding you must set Fax Storage to
ON .
1 . F A X F W D / P A G I N G
1 . F A X F W D / P A G I N G
P A G I N G ?
S E L E C T <- -> & S E T
P A G # :
E N T E R & S E T K E Y