Acura 2009 Accord Sedan - Manual (Page 106)

If you sometimes find that the
temperature reading is a few
degrees above or below the actual
temperature, you can adjust it by
following these instructions:
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO (
/ ) button
repeatedly.
Press the SEL/RESET button to
enter the setting.
The displayed number is the current
adjustment above or below the
outside temperature. Select this icon
by pressing the INFO (
/ ) button
repeatedly then press the SEL/
RESET button.
Adjust the outside temperature value
by pressing the INFO (
/ ) button
repeatedly. Press the SEL/RESET
button to set the desired value.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘LANGUAGE SELECTION’’ and
repeat the procedure again.
Adjust Outside Temp. Display
Multi-Information Display
100
Canadian models U.S. models