Acura 2009 Accord Sedan - Manual (Page 84)

If you do not fasten your seat belt,
you will also see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
information display when you turn
the ignition switch to the ON (II)
position.
These messages go off in about
several seconds after the key is
inserted into the ignition switch.
When you turn the ignition switch to
the ON (II) position, your last
selection is displayed.
These messages go off in about
several seconds.
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). See page
for ignition
switch and power mode comparison.
With the ignition switch in the ON
(II) position, the multi-information
display changes as shown on page
each time you press the INFO
( / ) button or the SEL/RESET
button.
180
80
On models with keyless access system
Multi-Information Display
78
SEL/RESET BUTTON
INFO BUTTONS ( / )