Acura 2009 Accord Sedan - Manual (Page 563)

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the lights to test the new
bulb.
(Driver’s side)
Install the upper part of the air
intake duct.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise.
Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Install the engine coolant reserve
tank.
(Passenger’s side)
Install the all engine compartment
covers.
To change a bulb on the
passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay.
4.
5.
6.
7.
8.
3.
9.
10.
Lights
Ma
int
e
na
nce
557
RESERVE TANK BULB
CONNECTOR STAY