Acura 2009 Accord Sedan - Manual (Page 409)

When you pair your phone to HFL,
the HFL system will automatically
select a pairing code at random or in
order. You can customize this setting
mode between Random and Fixed. If
you select the fixed mode, the HFL
system will select a pairing code
sequentially.
Press and release the Talk button.
After the beep, say ‘‘Set Pairing
Code.’’
HFL responds ‘‘Each time a phone
is paired with HandsFreeLink, a
pairing code is used for security.
This code can be randomly
generated by HandsFreeLink, or
fixed, which is needed for some
Bluetooth devices with a preset
pairing code. Would you like to set
the pairing code as Random or
Fixed?’’
Press and release the Talk button.
After the beep, to select the fixed
mode, say ‘‘Fixed.’’
HFL responds ‘‘What is the four
digit number you would like to set
as the pairing code? Press the Talk
button and say the number.’’
Press and release the Talk button.
After the beep, say a desired four-
digit number. For example, say
‘‘1000.’’
HFL responds ‘‘1000. Is this
correct? Press the Talk button and
say Yes or No.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
If the number is not correct, say
‘‘No.’’ HFL goes back to step 3.
HFL responds ‘‘HandsFreeLink
will use this code when pairing to a
Bluetooth device.’’
Press and release the Talk button.
After the beep, if the number is
correct, say ‘‘Yes.’’
1.
2.
3.
4.
5.
6.
To change the setting mode, do this:
Setting a Pairing Code
Bluetooth HandsFreeLink (Models without navigation system)
Fe
a
tu
re
s
403