Acura 2009 Accord Sedan - Manual (Page 404)

During the pairing process, turn
off any previously paired phones
before pairing a new phone.
If after three minutes your phone
is not ready to pair or a phone is
not found, the system will time out
and return to idle. The following procedure works for
most phones. If you cannot pair
your phone to HFL with this
procedure, refer to your phone’s
operating manual, visit
, call the
HandsFreeLink consumer
support at (888) 528-7876, or call
your phone retailer. In Canada,
call (888) 9-ACURA-9.
Park your vehicle. With your
phone on and the ignition switch in
the ACCESSORY (I) or ON (II)
position, press and release the
Talk button.
HFL prompts ‘‘Welcome to
Bluetooth HandsFreeLink. This
system enables hands-free usage
of a mobile phone. Before using
this system, a phone needs to be
paired or connected with
HandsFreeLink. Would you like to
pair a phone now? Press the
Bluetooth HandsFreeLink Talk
button, and after the beep, say Yes,
to begin the pairing process, or No,
to continue.’’
Your phone’s battery may drain
faster when it is paired to HFL.
Each time a phone is paired with
HFL, the system selects a pairing
code randomly or sequentially.
You can switch this setting
between random mode and fixed
mode. To select a pairing code
setting between Random and
Fixed, refer to page
.
1.
403
www.acura.
com/handsfreelink
To pair your first phone, follow the
prompts on the HFL system:
Bluetooth HandsFreeLink (Models without navigation system)
398