Lights – Acura 2009 Accord Sedan User Manual
Page 565
CONTINUED
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Remove the bulb by pulling it
straight out of its socket.
Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
new bulb is working.
Set the spoiler and inner fender
cover in the original position.
Install the bolts and holding clips,
and lock them in place by pushing
on their center.
4.
5.
6.
7.
8.
1.
9.
Lights
Replacing a Front Turn Signal/
Parking Light Bulb
Ma
int
e
na
nce
559
SOCKET
BULB