Acura 2009 Accord Sedan - Manual (Page 292)

To activate RDS category scan with
the interface dial, push the AUDIO
button to display the FM radio
information on the screen. Push the
interface selector down, and turn the
interface dial to select RDS search
on the audio menu. Press ENTER on
the interface selector. The screen
shows you the RDS category list.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN side of the SCAN/
A.SEL bar again.
If the system does not find a station,
‘‘NOTHING’’ will blink for about 5
seconds on the center display, then
‘‘NOTHING’’ will blink for about 5
seconds on the navigation screen
and the system will go back to the
last selected station.
The scan function samples all
stations with strong signals on the
selected RDS category one by one.
To activate it, press and release the
SCAN side of the SCAN/A.SEL bar.
You will see SCAN in the center
display. The system will scan for a
station with a strong signal in the
selected RDS category. You will also
see the selected RDS category name
blinking in the center display while
scanning it. When the system finds
one, it will stop and play that station
for about 10 seconds.
Playing the AM/FM Radio (Models with navigation system)
RDS Category SCAN
286
RDS CATEGORY LIST
SEEK/SCAN ICON (RDS Search mode)
SCAN is selected.