Acura 2009 Accord Sedan - Manual (Page 301)

The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
SCAN, press the SCAN side of the
SCAN/A.SEL bar. You will see
SCAN on the screen and center
display.
The system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
SCAN side of the bar to cancel.
This function
samples all channels. Push down the
interface selector to select AUDIO
MENU, then turn the interface dial
to select Channel Scan and press
ENTER on the interface selector.
Press the button. Either
XM1 or XM2 will be shown on the
display.
To store a channel:
You can store up to 12
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
This
function samples the stations in the
selected category. Push down the
interface selector to select AUDIO
MENU, then turn the interface dial
to select Category Scan and press
ENTER on the interface selector.
1.
CONTINUED
SCAN
CHANNEL SCAN
Preset CATEGORY SCAN
Playing the XM Radio (Models with navigation system)
Fe
a
tu
re
s
295