Acura 2009 Accord Sedan - Manual (Page 417)

To activate this function, do this:
Press and release the Talk button.
After the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notification, auto
transfer, and clear. Press the Talk
button and say a command.’’
If this feature is set to off, HFL
responds ‘‘Auto transfer is
disabled. Calls dialed on the phone
do not automatically transfer to
Bluetooth HandsFreeLink. Would
you like to enable Auto Transfer?
Press the Talk button and say Yes
or No.’’
Press and release the Talk button.
After the beep, say ‘‘Auto transfer.’’
If the setting changes from on to off,
HFL responds ‘‘Auto transfer is
disabled. Use the Transfer command
at the HandsFree main menu to
manually transfer calls dialed on the
phone.’’ If this feature is set to on, HFL
responds ‘‘Auto-transfer is enabled.
Calls dialed on the phone will be
automatically transferred to
Bluetooth HandsFreeLink. Would
you like to disable Auto Transfer?
Press the Talk button and say Yes
or No.’’
Never try to dial from your
phone directly if the vehicle is
moving.
To end the call, press the Back
button.
If the setting changes from off to
on, press and release the Talk
button. After the beep, say ‘‘Yes.’’
HFL responds ‘‘Auto transfer is
enabled.’’
When you make a call directly from
the phone with the auto transfer on,
make sure to stop your vehicle safely.
1.
2. 3.
Bluetooth HandsFreeLink (Models without navigation system)
Fe
a
tu
re
s
411
NOTE: