Acura 2009 Accord Sedan - Manual (Page 168)

With the ignition switch in the ON
(II) position, move the selector
switch to the L (driver’s side), or R
(passenger’s side).
Both outside door mirrors have a
reverse tilt feature. When in
reverse, the selected mirror will
tilt down slightly to improve your
view as you parallel park. Shifting
out of reverse will return the
mirror to its original position.
To tilt the driver’s mirror, place
the selector switch in the left
position.
To tilt the passenger’s mirror,
place the switch in the right
position.
To turn the feature off, place the
switch in the center position.
Outside mirror positions can be
stored in the driving position
memory system (see page
).
When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep your
settings.
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). See page
for ignition
switch and power mode comparison.
Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
3.
1.
2.
180
164
Adjusting the Power Mirrors Reverse Tilt Door Mirror
Mirrors
162
ADJUSTMENT SWITCH
SELECTOR SWITCH