Acura 2009 Accord Sedan - Manual (Page 408)

To change from the currently linked
phone to another paired phone, do this: To find out the status of the phone being
used, do this: To list all paired phones, do this:
Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’ Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
Press and release the Talk button.
After the beep, say ‘‘List.’’
HFL responds by listing the name
of each paired phone. When all
phones paired to the system have
been read, HFL responds ‘‘The
entire list has been read.’’
Press and release the Talk button.
After the beep, say ‘‘Status.’’ For
example, HFL responds ‘‘John’s
phone is linked. Battery strength
is three bars. Signal strength is
five bars, and the phone is
roaming.’’
Some Phones may not send the
status information to the HFL
system.
Press and release the Talk button.
After the beep, say ‘‘Next phone.’’
HFL responds ‘‘Searching for the
next phone.’’
The system then disconnects the
linked phone and searches for
another paired phone. If the
system finds it, for example, HFL
responds ‘‘Paul’s phone is linked.’’
If no other phones are found or
paired, the first phone remains
linked. For example, HFL responds
‘‘No other paired phones were
found/have been paired. Returning
to
John’s phone .’’
Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
HFL responds ‘‘Phone setup
options are pair, edit, delete, list,
status, next phone, and set pairing
code. Press the Talk button and
say a command.’’
2.
1. 1.
2.
1.
2.
Bluetooth HandsFreeLink (Models without navigation system)
402