Acura 2009 Accord Sedan - Manual (Page 233)

Each preset button can
store one frequency on AM and two
frequencies on FM.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
, press the
A. SEL (auto select) button. This
restores the presets you originally
set.
For information on AM/FM radio
frequencies and reception, see page
.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, skip, scan, or RDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Press the A. SEL button. ‘‘A-SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
1.
2.
3.
4.
372
To turn off auto select
Playing the AM/FM Radio (Models without navigation system)
Preset AUTO SELECT
Fe
a
tu
re
s
227