Acura 2009 Accord Sedan - Manual (Page 545)

CONTINUED
These messages will come on every
time you turn the ignition switch to
the ON (II) position.
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total mileage after the remaining
oil life became 0%, and the
maintenance item code(s). Press the SEL/RESET button on the
steering wheel repeatedly to select
the engine oil life. The message
‘‘SERVICE,’’ along with ‘‘0%,’’ and the
maintenance item code are displayed
on the multi-information display
when the calculated engine oil life is
0 to 1 percent.
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). See page
for ignition
switch and power mode comparison.
Immediately have the service
performed, and make sure to reset
the display as described on page
.
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
414
180
Maintenance Minder
Ma
int
e
na
nce
539
TOTAL PAST DUE MILEAGE
U.S.
CANADA
MAINTENANCE CODES