Acura 2009 Accord Sedan - Manual (Page 410)

You can select or change some
settings for the HFL system. Here
are the settings you can select or
change. To do this, make sure your
vehicle is parked safely, with your
phone on and the ignition switch in
the ACCESSORY (I) or ON (II)
position.
You can set a four-digit security
passcode to lock the HFL system
for security purposes.
If you forget your passcode, you
cannot activate HFL. Consult your
dealer to cancel the passcode.
You can also select a ‘‘System
Clear’’ command to reset HFL
(see page
).
You can change the security
passcode.
The incoming notification can be
set to a ring tone, a prompt, or no
notification. The default setting is
a prompt.
Press and release the Talk button.
After the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notification, auto
transfer, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
After the beep, say ‘‘Security.’’
HFL responds ‘‘Security is
disabled. Would you like to enable
security? Press the Talk button
and say Yes or No.’’
Press and release the Talk button.
After the beep, say ‘‘Yes.’’
HFL responds ‘‘What is the four-
digit number you would like to set
as your security passcode? Press
the Talk button and say the
number.’’
If you say ‘‘No,’’ HFL returns to
idle.
Press and release the Talk button.
After the beep, say the four-digit
passcode you want to use. For
example, say ‘‘1, 2, 3, 4.’’
HFL responds ‘‘1, 2, 3, 4. Is this
correct? Press the Talk button and
say Yes or No.’’
3.
1.
2.
4.
417
To set a security passcode, do this:
Setting Up the System
Setting a security passcode
Changing a security passcode
Selecting the incoming
notif ication
Bluetooth HandsFreeLink (Models without navigation system)
404