Acura 2009 Accord Sedan - Manual (Page 71)

If this indicator comes on when the
engine is running, the battery is not
being charged, and you will also see
a ‘‘CHECK CHARGING SYSTEM’’
message on the multi-information
display. For more information, see
page
.
This indicator has two functions:
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the rear
brakes, axles, and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ‘‘RELEASE
PARKING BRAKE’’ message on
the multi-information display (see
page
).
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). See page
for ignition
switch and power mode comparison.
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key, or on models with
keyless access system, if an
appropriate keyless access remote is
used. If it is not a properly coded key
or keyless access remote, the
indicator will blink, and the engine’s
fuel system will be disabled (see
page
).
1.
595
180
201
143
CONTINUED
Instrument Panel Indicators
Charging System
Indicator
Immobilizer System
Indicator
Parking Brake and
Brake System
Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65
U.S. Canada