Multi-information display – Acura 2009 Accord Sedan User Manual
Page 107
CONTINUED
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ADJUST OUTSIDE TEMP.
DISPLAY’’ and repeat the procedure
again.
You can select the reset timing of
the Trip A information: Trip A,
Average Fuel Economy A, Average
Vehicle Speed A, and Elapsed Time
A.
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO (
/
) button
repeatedly.
WITH REFUEL
The Trip A
information is reset every time you
refuel your vehicle.
MANUAL ONLY
You can reset
the Trip A information, when Trip A
is displayed (see page
).
There are three reset choices you
can make:
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. VEHICLE OFF (LOCK)
Mode is the equivalent of LOCK (0).
See page
for ignition switch and
power mode comparison.
IGN OFF
The Trip A information
is reset when you turn the ignition
switch to the LOCK (0) position.
81
180
Trip Computer Trip A Info Reset
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
101
U.S. models
Canadian models