Acura 2009 Accord Sedan - Manual (Page 593)

To remove the spacer cone,
squeeze the tabs on the wing bolt
to disengage it from the center of
the spacer cone, then pull the bolt
downward.
To install the wing bolt to the
spacer cone, reverse this
procedure.
Secure the flat tire by screwing
the wing bolt back into its hole.
Store the jack and tools in the tool
kit case. Place the tool kit case in
the flat tire. Store the center cap in the trunk.
Make sure it does not get
scratched or damaged.
Unhook the handle from the trunk
opening and lower the trunk floor
lid, then close the trunk lid.
Your vehicle’s original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
(see
page ).
17.
18. 19.
20.
530
Changing a Flat Tire
Changing a Tire with TPMS
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
587
SPACER CONE
TAB
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.