Acura 2009 Accord Sedan - Manual (Page 171)

Not press a memory button within
5 seconds.
Readjust the seat position.
Doing any of the following after
pressing the SET button will cancel
the storing procedure:
Readjust the outside mirror
position.
To select a memorized position, do
this:
Make sure the shift lever is in
Park.
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
Change the power mode out from
ON.
Turn the ignition switch out from
the ON (II) position.
1.
2.
CONTINUED
On models without keyless access
system
On models with keyless access system
Driving Position Memory System
Selecting a Memorized Position
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
165
MEMORY BUTTONS