HP EML E-series Tape Libraries - Manual (Page 10)

Parts of the library
The following figures show the parts of a 469e library. See (page 7) .
Figure 1 Front view of the library
2. Base module 1. Reserved space. If your library contains LTO4 or later
tape drives, this space contains the switch for the internal
network.
4. Card cage expansion module 3. Tape drive expansion module
6. Robotics unit 5. Capacity expansion module
8. Operator control panel (OCP) 7. Viewing windows
10. 4U blank covers 9. 5-Cartridge load port
11. 10-Cartridge load ports
10 Library overview