HP EML E-series Tape Libraries - Manual (Page 26)

Figure 22 Slot numbering in the card cage expansion module
2. Array targets 1. Slots available for data cartridges
4. Expansion identification label 3. Slots unavailable for use when the library floor is installed
in this module
6. Column numbering 5. Row numbering
Figure 23 Slot numbering in the capacity expansion module
2. Array targets 1. Slots available for data cartridges
4. Slots unavailable for use when a base module or tape
drive expansion module is above this module 3. Slots unavailable for use when the library floor is installed
in this module
6. Column numbering 5. Row numbering
7. Load port slots
Command View TL
Command View TL provides a browser-based GUI for remote management and monitoring of the
Interface Manager card through a LAN. Command View TL is the preferred method for controlling
the Interface Manager card. In conjunction with the Interface Manager card, Command View TL
provides the following:
•
Configuration and management of the Interface Manager card and FC interface controllers
•
Management of the entire library system
•
Hardware inventory and identity information
•
Status information for connected hardware
•
Error reporting and comprehensive error logs
•
Firmware management
•
License management
Command View TL is installed on a management station and communicates with the Interface
Manager card through the LAN. The management station processes information from the Interface
Manager card and serves up the Command View TL GUI. You can access Command View TL from
26 Library overview