E2400-fc 2gb interface controller, E2400-fc 4gb interface controller – HP EML E-series Tape Libraries User Manual
Page 44
e2400-FC 2Gb interface controller
Figure 39 Indicators on the e2400-FC 2Gb interface controller
Table 10 Indicators on the e2400-FC 2Gb interface controller
Function
Control/indicator
Index No.
ACT indicator--When lit, shows port activity. LNK
indicatorWhen lit, shows a valid link is established.
ACT/LNK indicators
1
When green, power is applied to the module.
PWR indicator
2
When yellow, Power-On-Self-Test (POST) is in process or
processor problems exist.
e2400-FC 4Gb interface controller
Figure 40 Indicators on the e2400-FC 4Gb interface controller
Table 11 Indicators on the e2400-FC 4Gb interface controller
Function
Control/Indicator
Index
No.
Use to locate the card.
Beacon
1
ACT indicator--When lit, shows port activity. LNK indicator--When lit, shows a
valid link is established.
ACT/LNK indicators
2
When green, power is applied to the module.
PWR indicator
3
When yellow, Power-On-Self-Test (POST) is in process or processor problems
exist.
To reset the card, insert a paper clip into the hole.
Reset hole
4
44
Using the library