Lto tape drives – HP EML E-series Tape Libraries User Manual
Page 45
LTO tape drives
Figure 41 Indicator on an LTO2 or LTO3 tape drive
Table 12 Indicator on an LTO2 or LTO3 tape drive
Function
Control/indicator
Index No.
When lit (yellow), indicates that initialization is in progress,
the library robotics controller software has detected a failure
FAULT LED
1
that requires the replacement of the tape drive assembly,
or a hot swap can occur.
When not lit, indicates normal operation.
Figure 42 Indicators on an LTO4 tape drive
Table 13 Indicators on an LTO4 tape drive
Function
Control/indicator
Index No.
When lit (yellow), indicates that initialization is in progress,
the library robotics controller software has detected a failure
FAULT
1
that requires the replacement of the tape drive assembly,
or a hot swap can occur.
When not lit, indicates normal operation.
Beacon.
ID
2
When lit (green), indicates link activity on FC port A.
FC A
3
When lit (green), indicates link activity on FC port B.
FC B
4
Controls and indicators
45