Power distribution unit – HP EML E-series Tape Libraries User Manual
Page 49
Advertising
Power distribution unit
NOTE:
The EML 71e does not include a power distribution unit because you install it in your
own rack.
Figure 48 Controls and indicator on the PDU
Table 19 Controls and indicator on the PDU
Function
Control/indicator
Index No.
When lit (red), shows power is applied to the unit. When
not lit, indicates the PDU is not receiving power.
Power LED
1
When switched On, applies power to power strip 1.
PDU switch 1
2
When switched On, applies power to power strip 2.
PDU switch 2
3
When set to I (On), applies power to the power strip. When
set to O (Off), removes power from the power strip.
Power strip power switch
4
Controls and indicators
49
Advertising