Ag-Bag MB7010HyPac - Manual (Page 105)

13
S
ERVICE AND
M
AINTENANCE
STOP MACHINE AND TURN OFF ENGINE TO ADJUST
,
LUBRICATE
,
OR SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 7
Feed Table Adjustment (cont.)
Drive Chain Adjustment
1. Drive Chain
2. Feed Table Drive Motor
3. Adjustment Lock Nut
4. Adjustment Bolt
5. Mounting Plate Bolts
Lubricate Chain Daily. See Oil
Specification in this manual.
To adjust chain, loosen the four
mounting plate bolts (5) hold-
ing the mounting plate. Loosen
the adjustment lock nut (3).
Using the adjustment bolt (4)
tighten or loosen the chain.
There should be NO deflection
in this chain. When you have
finished adjusting chain tighten
the adjustment lock nut (3) and
then the four mounting plate
bolts (5).
1 2
3 4
5