Ag-Bag MB7010HyPac User Manual
Page 79
S
ETUP
AND
O
PERATING
P
ROCEDURES
29
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 4
P
REPARE
THE
A
G
-B
AGGER
®
F
OR
T
RANSPORT
Anchor Transport
1. After removing anchor from
the bag during bagging opera-
tion move anchor to hook lo-
cated in the tunnel and hang it
there.
2. Fold anchor support socket
back into tunnel.
3. Using the controls on the Arm
Rest Console take the slack out
of the cable.
Pintle Hitch Transport
Use only the pintle hitch provide
for towing the Ag-Bagger
®
1. Remove the pin and hair pin
and slide the hitch out.
2. Remove the hitch stabilizer
from its storage position.
3. Place hitch stabilizer into the
receiver on the hitch and insert
pins to lock into position.
Caution should be used
to leave some slack in
the cables. Pulling to
tight will cause cable to
kink.
2
3
1
2